MSK100A-0300-NN-S1-BG1-NNNN

  • Rated 4.3 (31 total ratings)
  • MPN: R911331229
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The MSK100A-0300-NN-S1-BG1-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 17.0 Nm and a continuous current of 11.6 A. It also displays a maximum torque of 54.0 Nmand a maximum current of 45.9 A and a winding inductive of 11,200 mH

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

MSK100A-0300-NN-S1-BG1-NNNN

  • Rated 4.3 (31 total ratings)
  • MPN: R911331229
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The MSK100A-0300-NN-S1-BG1-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 17.0 Nm and a continuous current of 11.6 A. It also displays a maximum torque of 54.0 Nmand a maximum current of 45.9 A and a winding inductive of 11,200 mH

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a MSK100A-0300-NN-S1-BG1-NNNN to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The MSK100A-0300-NN-S1-BG1-NNNN synchronous servomotor provided by Bosch Rexroth is associated with an A-frame length code. This motor retention in its original state is necessary without making any structural changes. The device installation plus operation is not permitted in a defective or damaged state. This unit performs functions specific to the application only when the related drive controller is programmed before the startup. Its components offer assurance of optimal and safe operation only with correct and proper installation, mounting, transport and storage. The motor can never be operated at more than 3000m above sea level elevation. This product has live connectors and connecting points during operation.

The device can have high electric voltage and work current because of incorrect operation. This unit features faulty control with incorrect cable connection or wiring and/or wrong parameters input prior to commissioning leading to dangerous movements of the drive controller. Its drive controller should be in standstill mode before entering the danger zone. The motor cooling time is approximately five times its thermal constant. This product might explode if the tensile load of its connection cables is exalted. The device must feature mechanical fastening of its cable ends. This servomotor features backup support valid for a year.

The motor has a rugged and compact design. This product triggers ignition sparks when the connectors are either connected or disconnected under load. The device has leakage current over the housing because of corrosion in its lifetime. This unit needs a unit test to be executed in accordance with EN 60079-15 specifications if safety-related components are serviced or explosion protection properties are changed. Its holding brake is controlled by the drive controller. The motor housing does not have leakproof properties because of the deterioration of its gaskets over time and unavoidable temperature fluctuations. This servomotor is deliverable to any address worldwide through an associated global network.

MSK100A-0300-NN-S1-BG1-NNNN Documents

  • MSK-100A-0300-NN-S1-BG1-NNNN
  • MSK100A 0300 NN S1 BG1 NNNN
  • MSK100A0300NNS1BG1NNNN

MSK100A-0300-NN-S1-BG1-NNNN Technical Specifications

Continuous Current at Standstill 100 K: 11.6 A
Continuous Torque at Standstill 100 K: 17.0 Nm
Maximum Current: 45.9 A
Maximum Torque: 54.0 Nm
Winding Inductivity: 11,200 mH
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo