MSK100A-0300-NN-M1-BP1-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911400522
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK100A-0300-NN-M1-BP1-NNNN is a powerful synchronous servomotor from Bosch Rexroth Indramat. The device has a maximum speed of 5200 rpm. The maximum rated current of the unit is 45.9 A. There are 4 pairs of poles in the model.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth produces an extensive variety of industrial automation equipment. The most used firm assets are drive controllers, synchronous motors, frequency converters, and main spindle motors.
The MSK100A-0300-NN-M1-BP1-NNNN model housing is suitable for surface cooling and has a 39-minute thermal time constant. This synchronous motor's IP 65-rated housing and black paint finish provide protection from dust and water jets from all directions. The MSK100A synchronous motor boasts a robust and aesthetically beautiful design, as well as an output shaft with keyways and an upper sealing ring. Utilizing a low constant current of 11.6 A, the synchronous motor generates a constant torque output of 17 Nm at 100 K. To avoid harm, the device should only be used and installed by a qualified technician. This synchronous motor is excellent for a wide range of applications due to its lightweight (about 23 kilos) and exceptional flexibility and durability. The model holding brake weighs 1.1 kilos and has a holding torque of 32 Newton meters. The holding brake's connection and disconnection times are 15 and 115 milliseconds, respectively. This MSK100A synchronous motor is notable because of its class 155 insulation and absolute multiturn hiperface encoder.
The model MSK100A-0300-NN-M1-BP1-NNNN has an electrical connection on the B side of the housing and produces 15 Nm of continuous torque at 60 K while using 10.2 A of current. The shipping and storage temperature range must be between -20 and +80 degrees Celsius. The best conditions for motor operation are temperatures between 0 and 40 degrees Celsius and relative humidity below 90 percent. This motor (MSK100A-0300-NN-M1-BP1-NNNN) must be linked with a drive controller to get the best degree of performance.
