Product Description:

The MSK100A-0200-NN-S2-BP0-RNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S motor, it converts drive controller output into precise rotary motion for positioning tables, packaging equipment, and other automated axes that demand tight velocity and torque control. Its increased concentricity design helps reduce shaft runout and supports accurate alignment with coupled loads. This layout is useful in motion systems that require repeatable starts, stops, and stable speed regulation under changing load conditions. It is intended for machine axes where accurate feedback and smooth rotary response are more important than simple constant-speed operation.

The stator windings are cooled by natural convection, so airflow around the housing is enough to remove operating heat without fans or liquid circuits. Position feedback comes from an optical encoder that communicates through the EnDat2.1 interface, giving serial data to the drive. The encoder provides 2048 signal periods per mechanical revolution and uses a single-turn format, so the drive receives absolute position information within one turn. Power enters through a connector on side B, and mechanical output is delivered through a shaft with a keyway for positive torque transmission to couplings or pulleys.

The housing has an IP65 protection rating, which keeps out dust and resists water jets when the motor is mounted directly on machinery. Continuous duty is permitted in ambient temperatures from 0 to 40 °C, and Class 155 insulation supports the winding temperatures associated with dynamic servo cycles. The 0200 winding code matches the electrical characteristics expected by compatible MSK drive modules. The motor has an A-length body and a size-100 frame, and it is supplied without a holding brake, so any load that must remain fixed after power removal needs external holding force.