MSK100A-0200-NN-S2-BG0-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911330217
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
47 Seconds
The Bosch Rexroth Indramat MSK100A-0200-NN-S2-BG0-RNNN is part of the MSK IndraDyn S Synchronous Motors series and features natural convection cooling with a plain shaft design. This servomotor uses optical encoder technology with EnDat2.1 interface at 2048 signal periods resolution and comes with an IP65 protection rating. The motor's power connector is on the B-side, operates within a 0 to 40°C temperature range, and does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK100A-0200-NN-S2-BG0-RNNN servo motor is built by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts drive output into controlled rotary motion for numerically controlled machine axes, conveyors, and pick-and-place modules. In closed-loop motion systems, it responds to current commands from the drive so speed and position can be regulated during repeated production cycles. Size 100 and length code A set the mechanical envelope, while the increased concentricity design limits shaft runout so direct coupling to precision loads remains accurate.
Heat is removed by natural convection, eliminating fans and reducing maintenance points. Feedback uses the EnDat 2.1 interface, which sends absolute position data and electronic identification data to the drive. Its internal encoder relies on optical scanning and produces 2048 signal periods per revolution; with drive interpolation, this supports very fine position resolution. Because the feedback device is single-turn, absolute position is available only within one mechanical turn, and multi-turn tracking must be handled by the control system. Winding code 0200 matches the electrical characteristics expected by standard IndraDrive amplifiers, and the power connector is arranged on side B for cable routing. This model is supplied without a holding brake, so static load retention must be provided by external mechanisms.
The sealed aluminum housing carries an IP65 rating, which blocks dust and low-pressure water jets. Continuous operation is permitted in ambient temperatures from 0 to 40 °C, and the winding insulation meets class 155. A balanced plain shaft supports direct coupling to gearboxes or timing pulleys without keyway stress. The housing and shaft arrangement suit compact machine layouts where direct coupling and sealed surfaces are needed around the axis. The A-length frame is suitable for packaging, handling, and light machining equipment.
Frequently Asked Questions about MSK100A-0200-NN-S2-BG0-RNNN:
Q: What cooling method is used by the MSK100A-0200-NN-S2-BG0-RNNN motor?
A: The MSK100A-0200-NN-S2-BG0-RNNN utilizes natural convection for cooling, operating without forced air or external cooling devices.
Q: What shaft type does the MSK100A-0200-NN-S2-BG0-RNNN feature?
A: This model is equipped with a plain shaft, suitable for standard rotary mechanical connections.
Q: What type of encoder interface and technology are present on the MSK100A-0200-NN-S2-BG0-RNNN?
A: It features an EnDat2.1 encoder interface and optical encoder technology for precise motor feedback.
Q: Where is the power connector positioned on the MSK100A-0200-NN-S2-BG0-RNNN?
A: The power connector on this motor is located on the B-Side for easy integration into control systems.
Q: What is the protection rating of the MSK100A-0200-NN-S2-BG0-RNNN motor?
A: The MSK100A-0200-NN-S2-BG0-RNNN has an IP65 protection rating, providing substantial protection against dust and water ingress.
