Product Description:

The MSK100A-0200-NN-S1-BP0-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. Designed for closed-loop drive systems, the motor delivers precise torque and velocity so automated positioning tables, gantries, and printing cylinders follow programmed motion profiles without drift. This operating role makes it suitable for synchronized axis control where rapid correction of load changes is needed during normal machine cycles. Its construction follows the standard mechanical format of the series, so it fits machine layouts that use the same electrical and mounting interface.

Thermal management relies on natural convection; heat is removed through the housing surface, so no external blower or liquid circuit is required. Motion feedback is generated by a Hiperface-compatible encoder: the interface is Hiperface, the read head uses optical sensing, and it resolves rotor position over 128 signal periods per revolution. With a single-turn device, the controller receives absolute angle information within one mechanical turn, which is suitable for applications that home at startup and do not exceed 360° of continuous rotation. The encoder’s digital link carries both position data and motor nameplate data for setup and diagnostics, and the optical measuring principle supports stable signal quality during controlled speed and position changes.

The motor has size 100 with A length, giving a compact axial profile while maintaining solid torque capacity for gantry axes. Power wiring is attached on the B-side of the housing, which helps when cables are routed along the right side of a machine frame. Torque is transmitted by a shaft with keyway, and winding code 0200 identifies the electrical values used for drive tuning. The motor is supplied without a holding brake, so position must be maintained by servo control or external mechanical locking when power is removed. This arrangement is often used where the driven mechanism already includes a separate locking method or where controlled standstill torque is sufficient.