Product Description:

The MSK100A-0200-NN-S1-AP1-NNNN servomotor manufactured by Bosch Rexroth Indramat belongs to the MSK IndraDyn S Synchronous Motors series. It is an IndraDyn S synchronous servomotor designed for closed-loop positioning and speed control in industrial automation tasks such as handling modules and packaging axes. The unit follows the standard design profile and uses motor size 100 with length code A to provide torque in a compact footprint.

The motor is cooled by natural convection, meaning heat is dissipated through the housing without forced air or liquid lines. Its protection class of IP65 seals the enclosure against dust ingress and low-pressure water jets so the unit can be mounted outside sealed cabinets. An electrically released holding brake delivers 32 Nm of static torque, allowing the axis to maintain position during power loss. Mechanical power is transmitted through a shaft with a keyway, simplifying coupling to pulleys or gearboxes by providing positive torque transfer. Feedback and drive communication rely on the Hiperface encoder interface, enabling absolute position data to reach the controller over a single hybrid cable.

The integrated single-turn encoder employs an optical scanning method and resolves rotor position into 128 signal periods, supporting fine interpolation by the drive for smooth motion. The motor is intended for ambient temperatures from 0 to 40 °C, and within this range the winding code 0200 can operate continuously without derating. Insulation class 155 permits winding temperatures up to 155 °C, providing an extra margin between operating and thermal limit. The A-side power connector orients the cable toward the drive cabinet, and the standard design leaves space for accessory air ducts if tighter cycles require forced cooling in future retrofits.