Product Description:

The MSK100A-0200-NN-S1-AG0-NNNN is an IndraDyn S synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. This unit serves as a precision actuator that provides closed-loop torque and velocity to machinery axes in packaging, printing, and material-handling equipment. It works with a drive controller to convert digital commands into mechanical rotation while maintaining accurate position and speed response during repeated motion cycles. Its synchronous design is suited to axes that require controlled starts, stops, and speed changes throughout normal machine operation.

Heat produced during operation is removed by natural convection, so no external fan or liquid circuit is required. The motor uses size 100 and length A dimensions, and winding code 0200 indicates the electrical profile expected by the matching drive. Feedback is provided by a Hiperface encoder with 128 signal periods per revolution; its optical sensing path and single-turn absolute track return position data immediately after power-up. This feedback arrangement supports commutation and accurate position evaluation inside the drive. The power connector is placed on the A-side, which helps route motor cables away from adjacent machine elements.

The housing has an IP65 enclosure rating that protects the internal windings against dust and low-pressure water jets, allowing direct installation on the machine frame. Reliable operation is maintained in ambient temperatures from 0 to 40 °C, and the output uses a plain shaft so couplings or timing-belt pulleys can be fitted without a keyway. That shaft form is commonly used where clamping hubs or belt pulleys provide torque transfer and a keyed connection is not required. Insulation class 155 supports winding temperatures up to 155 °C, and the motor is supplied without a holding brake, so position retention at standstill must come from the driven mechanism or the control system.