Product Description:

The MSK100A-0200-NN-M1-BP0-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It is an IndraDyn S synchronous servo motor for closed-loop torque and position control in packaging lines, pick-and-place axes, and other motion tasks that require high dynamic accuracy. The motor uses a 100 frame size with an A-length stator, giving it a compact footprint for installations that need precise motion without a large motor body. Its closed-loop design supports repeatable positioning and responsive speed changes during continuous production cycles.

Mechanical protection is rated at IP65, so the housing prevents dust ingress and resists water jets in typical cabinet-free mounting. Heat is removed by natural convection, so no external blower or liquid circuit is required. Continuous operation is allowed between 0 and 40 °C, and Class 155 insulation supports the winding temperature reached during heavy cyclic duty. The frame follows the standard design code, and the A length helps reduce overall motor depth. The unit is supplied without a holding brake, so static load retention must be provided by the drive or an external mechanical lock. A keyed output shaft transmits torque accurately, and the power connector is placed on the B side to route the cable away from the load side.

Position feedback relies on a Hiperface interface that carries data from the optical encoder. The measuring system resolves rotation into 128 signal periods, and its multiturn absolute design preserves shaft position after power is removed. The optical measuring principle helps minimize drift over time. For mechanical coupling, a shaft with keyway simplifies hub alignment. Winding code 0200 matches the electrical characteristics expected by compatible Rexroth drives for current and voltage coordination.