Product Description:

The MSK100A-0200-NN-M1-BG0-NNNN is a synchronous servo motor from Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series. It works as the rotary drive element in automated positioning axes, converting commanded current from a compatible drive controller into controlled motion for packaging systems, material-handling equipment, and machining units. This version uses the 0200 winding code and is built in motor length A with frame size 100, so it fits applications that need the electrical characteristics and mechanical envelope associated with that combination. That layout is commonly used on feed axes, transfer units, and indexing mechanisms where compact installation and predictable motor behavior are important. When paired with a suitable servo drive, it supports accurate acceleration, steady speed regulation, and repeatable stopping points.

Heat is removed by natural convection, so the installation should allow free air movement around the housing instead of relying on a separate blower or liquid circuit. Feedback is carried through the Hiperface interface, which sends position data through a combined feedback connection and supports closed-loop servo operation. The encoder provides 128 signal periods, and the sensing system uses optical scanning for stable position detection. This arrangement helps the drive monitor both commutation and position feedback during changing load conditions. Because the feedback device is multiturn absolute, shaft position remains available after power cycles, which reduces the need for a return-to-home routine before normal motion resumes.

This motor is supplied without a holding brake, so any load that must remain fixed after power removal needs an external locking method or drive-controlled holding torque. The housing has an IP65 rating when the mating connector is properly installed, which helps protect internal parts from dust and low-pressure water jets in typical machine environments. Continuous operation is allowed in ambient temperatures from 0 to 40 °C, and the insulation system supports the thermal demands created during regular servo duty. Torque is delivered through a plain shaft, which is intended for direct connection to a coupling or gearbox, and the side-mounted power connector helps when cable-routing space is limited. Because there is no shaft key, torque transfer depends on the selected clamping element at the machine interface.