Product Description:

The MSK076C-0450-NN-M2-UG0-RSNN is a synchronous servomotor in the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. It uses the 076 frame with C length, giving it a balance of torque density and installation depth for medium-duty servo axes. In automated equipment, it converts current from a compatible drive into precise rotary motion for packaging lines, pick-and-place stations, and general handling systems. This layout supports accurate speed and position control in applications that require repeatable movement through frequent start, stop, and indexing cycles.

Cooling is provided by natural convection, so the motor can dissipate heat without forced airflow. Position feedback is transmitted through the EnDat2.1 serial protocol, which gives the drive detailed rotor information for closed-loop control. The encoder provides 2048 signal periods and uses multiturn absolute feedback, allowing shaft position to remain available over multiple revolutions without battery support. The winding arrangement is matched to continuous servo duty, and the permitted ambient air range of 0 to 40 °C supports operation in standard industrial environments. This combination of cooling and feedback helps maintain stable motion response during normal production use.

The electrical connection uses a connector that is rotatable through 240°, which helps route cables in confined machine spaces. The motor is supplied without a holding brake, so the axis must rely on drive torque or external holding hardware when power is removed. Mechanical output is transferred through a plain shaft, which is suitable for connection to compatible clamping or keyed hubs. The housing carries an IP65 rating to resist dust and low-pressure water jets during industrial operation. These features make the motor easier to integrate where cable orientation, shaft coupling, and enclosure protection are important to the overall axis layout.