The MSK076C-0300-NN-S2-UP0-RNNN-R is a sophisticated motor by Rexroth, Indramat. The MSK076C-0300-NN-S2-UP0-RNNN-R has a winding code of 300 and has singleturn EnDat2.1, optical encoder with 2048 increments. It has a shaft with keyway per DIN 6885-1 with a shaft sealing ring and a cooling mode of natural convection.
This Servo Motor has been around for quite a long period of time and it is utilized for various applications. The MSK076C-0300-NN-S2-UP0-RNNN-R is energy efficient and can be operated easily with the help of remote controlled. It is controlled using an electrical signal which determines the moment of the shaft. The positionable shaft is usually fitted with a gear.
The MSK076C-0300-NN-S2-UP0-RNNN-R belongs to Insulation class EN 60034-1 – F and has a IP65 degree of protection. You need to pay a closer attention to the temperature while operating it in various conditions. The ambient temperature during operation for the MSK076C-0300-NN-S2-UP0-RNNN-R is up to 40 degrees. The MSK076C-0300-NN-S2-UP0-RNNN-R consists of total number of 4 pole pairs. If you know how this motor works you will have more opportunities to have your projects work efficiency while delivering great results. The MSK076C-0300-NN-S2-UP0-RNNN-R can provide you perfect outcomes particular if you are a hobbyist building robots or you are just curious about how these servo motors works.
In order to position the motor or to control the speed of the motor the drive controller requires information on the current rotor position. To achieve the highest efficiency of the MSK076C-0300-NN-S2-UP0-RNNN-R the integrated encoder unit makes the viable signals that are available to the specific drive controller. Before you could the MSK076C-0300-NN-S2-UP0-RNNN-R make sure you know all the safety measures otherwise it may cause property damage or damage to your health. In severe cases it may cause death, so please careful.
|Other Design||Reduced shaft run-out, axial run-out according to DIN 42955|
|Cooling Mode||Natural Convection|
|Encoder||Optical encoder, singleturn EnDat2.1, with 2048 increments|
|Electrical Connection||Plug, rotatable 240 degrees|
|Shaft||Shaft with keyway per DIN 6885-1 with shaft sealing ring|
|Holding Brake||Without holding brake|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved