Product Description:

The MSK076C-0300-NN-S1-UG0-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat and part of the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S actuator, it works with IndraDrive converters to deliver controlled torque and speed for pick-and-place stations, feed axes, and compact gantries. Integrated encoder electronics support closed-loop control so the motor can hold commanded positions, follow motion profiles, and synchronize with other axes in automated equipment. This operating role makes the unit suitable for machinery that depends on repeatable positioning and stable speed regulation during frequent start-and-stop cycles.

Heat generated in the stator is removed by natural convection, so external blowers or liquid circuits are unnecessary and surrounding wiring space stays clear. Feedback is handled through the Hiperface interface, which streams absolute position data from an optical scanning head with 128 signal periods per mechanical revolution; this resolution allows fine interpolation in the drive for smooth velocity control. The encoder is a single-turn type, so the absolute position repeats after one shaft revolution and is suitable for axes that perform a homing routine at power-up. The motor is supplied in the standard mechanical design and comes without a holding brake, so stationary load retention must be provided by drive torque or external machine hardware.

The output shaft is a plain shaft, allowing couplings or pulleys to be fitted without keyway alignment. The motor uses frame size 076, and length category C provides a balanced combination of installation size and continuous torque capability for compact machine layouts. Electrical behavior follows winding code 0300, which matches the current and voltage characteristics expected by compatible drive electronics. Installation flexibility is improved by an encoder connector that is rotatable through 240°, allowing the cable exit to be directed away from nearby components and reducing interference with adjacent hardware during cabinet or machine integration.