Product Description:

The MSK075E-0200-NN-S1-UG0-NNNN servo motor is built by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. As a permanent-magnet AC drive, it supplies controlled torque and speed to gantries, packaging axes, or printing cylinders where closed-loop precision is required. Its compact 075 frame helps it fit into tight machine spaces common in multi-axis automation. This type of motor is suited to applications that need repeatable motion, stable speed regulation, and accurate response to changing load conditions.

Cooling is provided by natural convection, so heat is released through the housing surface without forced air or liquid circuits. The feedback plug uses a rotatable 240° connector, so the cable can be routed around the rear of the motor to reduce strain or avoid obstructions. Position data is transmitted over the Hiperface serial interface, allowing power and digital feedback to share one hybrid cable. This arrangement keeps the connection layout compact and supports clean cable routing at the motor end. Inside the housing, an optical incremental encoder scans a glass disk, and its scale provides 128 signal periods per mechanical revolution.

The encoder delivers absolute data on a single-turn basis, so the drive knows rotor position immediately after power-up within one revolution. The motor is supplied without a holding brake, so power-off clamping must be be provided externally when the application requires it. The output end uses a plain shaft, which supports direct coupling with collets or shrink discs. This shaft style is useful where a keyless connection is preferred for smooth torque transfer and compact assembly. The electromagnetic design follows winding code 0200, which sets the voltage constant and rated current profile used when pairing the motor with IndraDrive controllers.