Product Description:

The MSK075E-0200-NN-M1-UP1-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It serves as the rotary axis element in industrial automation systems that require precise torque control and accurate position feedback for coordinated motion on packaging machines, handling units, transfer systems, and precision indexing axes. Its synchronous design supports smooth speed regulation and accurate stopping at commanded positions. The feedback device stores multi-turn information as multi-turn absolute, so the axis retains position after power cycles without a homing routine. This allows the connected drive to recover position status immediately and continue controlled motion with minimal delay.

Heat is removed from the stator by natural convection, so no forced-air or liquid cooling hardware is needed in the cabinet and airflow requirements remain simple. An electrically released holding brake supplies 23 Nm of static torque, allowing vertical axes to stay locked during power-off conditions. The housing carries a protection rating of IP65, so dust is kept out and the shaft seal resists low-pressure water jets. Position data is transmitted through the Hiperface interface, and the optical encoder resolves rotation into 128 signal periods, giving the connected drive accurate incremental and absolute feedback. The encoder connector can be rotated through 240° for easier cable routing, while the standard housing keeps mounting dimensions consistent with other E-length MSK motors.

Output torque is delivered through a shaft with a keyway, which simplifies coupling to pulleys, pinions, or geared loads that rely on positive torque transmission. Continuous operation is permitted within an ambient range of 0 to 40 °C, matching typical indoor industrial conditions. Thermal durability is supported by insulation class 155, which allows the winding system to tolerate elevated operating temperatures. Frame code 075 indicates the stator diameter, and the E length balances rotor inertia and continuous torque for medium-duty axis applications. Winding set 0200 matches the motor to compatible IndraDrive controllers that supply the voltage and current required for its torque-speed range.