Product Description:

The MSK075E-0200-NN-M1-UG2-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. It serves as a torque and position actuator in industrial automation, where precise closed-loop motion is required for packaging lines, material-handling axes, and machining heads. The encoder system supports accurate position feedback during motion, and the integrated brake helps hold vertically loaded axes when power is removed. This combination makes the motor suitable for applications that need stable motion control along with secure standstill holding.

The motor has a frame size of 075, giving it a compact cross-section that balances inertia and continuous torque. A protection rating of IP65 seals the housing against dust ingress and low-pressure water jets, allowing direct mounting on exposed machinery. The output end uses a plain shaft, which is suited to direct-coupled drive arrangements. Feedback is transmitted through a Hiperface interface, and the optical sensor provides 128 signal periods per revolution for interpolation by the drive. For static holding or emergency stops, an electrically released brake provides 30 Nm of torque to keep the axis in place without an external clamp.

Cooling is handled by natural convection, so airflow around the housing should remain unobstructed during operation. Position data remain available across multiple revolutions because the motor uses a multi-turn absolute encoder, and the 240-degree rotatable connector helps with cable routing in confined spaces. Winding code 0200 and motor length E are matched to the motor’s electromagnetic layout and installation size. Class 155 insulation supports continuous service at winding temperatures associated with operation in ambient conditions from 0 to 40 °C. The standard mechanical layout also supports installation on machine designs that use the common MSK flange geometry.