Product Description:

The MSK075D-0200-NN-S1-UG0-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As a servo actuator, it converts drive controller commands into precise rotary motion for positioning tasks on packaging lines, pick-and-place gantries, and other automated axes. It is intended for closed-loop motion systems that need accurate speed and position control during repeated start-stop cycles. The motor uses winding code 0200, and its standard design with a plain shaft supports keyless coupling to compatible mechanical components.

The motor uses natural convection, so heat is released through the housing without fans or liquid cooling circuits. A housing sealed to IP65 blocks dust and low-pressure water jets, allowing direct installation on machinery without extra covers in many industrial settings. Motor size 075 with length D sets the mechanical envelope, which helps determine the available mounting space around the housing and cable outlet. Feedback is transmitted through Hiperface, and the encoder uses optical sensing technology with 128 signal periods per revolution to provide stable position data for the connected drive.

A connector port that is rotatable through 240° helps route cables with less strain where space is limited. Rotor position is tracked by a single-turn system, which suits axes that return to a reference position after startup instead of storing multi-turn data internally. Operation is permitted at ambient temperatures from 0 to 40 °C, and the winding insulation uses thermal class 155 for elevated internal temperature capability. Because the motor is supplied without a holding brake, any vertical load must be supported by external locking or drive-generated torque during power-off conditions.