Product Description:

The MSK075D-0200-NN-M1-UP1-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. Designed for closed-loop motion platforms, the unit delivers precise torque and velocity control to conveyors, pick-and-place axes, and packaging spindles that run from Rexroth drive controllers in industrial automation cells. Its servo design supports accurate positioning and stable speed regulation during repeated machine cycles. This makes the motor suitable for automation tasks that require responsive motion and dependable feedback.

Thermal management relies on natural convection, so the housing dissipates heat without external fans. A feedback plug with a rotatable 240° connector simplifies cable routing in tight cabinets and crowded machine layouts. Inside the feedback module, the Hiperface interface transmits position and status data from an optical system with 128 signal periods. The encoder operates as a multi-turn absolute device, so shaft position remains available across power interruptions. The motor uses size 075 with length D, and winding code 0200 matches the electrical characteristics to compatible drive outputs in the mid-current range. Optical scanning also supports stable signal quality without the drift associated with magnetic sensing methods.

An electrically released holding brake delivers 23 Nm of static torque so vertical loads can remain secure when the drive is disabled. The enclosure has an IP65 rating, which protects against dust ingress and directed water jets during operation in demanding machine areas. The motor is intended for ambient temperatures from 0 to 40 °C. Torque is transferred through a shaft with a keyway, making the motor compatible with keyed couplings and pulleys. Insulation class 155 protects the windings against temperature rise under full load, and the ribbed frame helps move heat away from the housing during continuous service.