Product Description:

The MSK075C-0200-NN-S2-UG0-RNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It pairs with electronic drive controllers for rotary motion tasks that require precise position feedback and stable speed control in automated equipment. A 075 frame size and C length establish the mechanical envelope for integration into compact automation cells where installation space is limited, while the shaft transmits continuous torque to couplings or gear stages in packaging lines, pick-and-place axes, and general machine-tool feeds.

Its thermal behavior is governed by natural convection cooling, so the housing dissipates heat without auxiliary fans or liquid circuits. The stator follows winding code 0200, which sets the phase resistance and inductance expected by compatible MSK drive modules in medium-torque applications. Position data comes from an optical encoder with 2048 signal periods per mechanical revolution, and the EnDat2.1 serial interface supports drive-based interpolation for smooth velocity control. The motor is sealed to IP65, guarding the windings and bearings against dust ingress and low-pressure water jets during washdown or coolant splash conditions.

A plain shaft allows backlash-free clamp or shrink couplings, and the increased concentricity design helps minimize radial runout during repeated positioning cycles. The encoder plug is rotatable through 240°, which helps route cabling away from adjacent components in dense machine layouts. Service conditions permit ambient temperatures from 0 to 40 °C. The insulation system is rated to class 155, so the stator can tolerate winding temperatures typical of continuous duty. Because the motor is supplied without a holding brake, static load retention must be handled by the drive or by external locking devices when the axis is at standstill, and the encoder supports homing routines after power-up.