Product Description:

The MSK071E-0200-NN-S3-UP0-NNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts drive output into rotational motion for positioning tasks in automated packaging, handling, and machining equipment. Integrated electronic feedback permits closed-loop control, making the unit suitable for axes that demand high accuracy and stable torque across varying loads. This operating profile suits applications that require repeatable starts, stops, and direction changes during continuous machine cycles. It is also suitable for synchronized motion sequences in which the axis must maintain smooth response while following changing command values.

The motor is cooled by natural convection, so heat leaves the housing without forced airflow, which simplifies machine integration and eliminates fan maintenance. An IP65 enclosure prevents dust ingress and protects against low-pressure water jets, allowing installation on machines exposed to cleaning cycles. Motion data travel through a Hiperface interface, which links the drive to the onboard capacitive single-turn sensor and provides position signals over 16 signal periods for each mechanical revolution. The feedback connector is rotatable through 240°, enabling cable routing in multiple directions during assembly. A shaft with a keyway provides positive torque transmission, and the motor is supplied without a holding brake, so static load retention must be handled externally.

With a frame size of 071, the motor fits the mid-range of the MSK family and uses the 0200 winding code, which sets its electrical impedance and torque constant. That format makes it useful where moderate installation space must be balanced against solid continuous output. The length designation E extends the lamination stack to raise output without altering the mounting interface. Continuous duty is approved from 0 to 40 °C, and operation outside this range may require current reduction. Class 155 thermal insulation withstands the hot-spot temperatures created during rapid accelerations. The standard mechanical design remains compatible with common MSK mounting flanges and accessories.