Product Description:

The MSK071E-0200-NN-S3-UG0-NNNN is a servo motor produced by Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series. It transforms drive current into accurately regulated torque for packaging machinery, printing cylinders, and multi-axis pick-and-place units. With its 071 frame size and E length, the motor offers moderate continuous output while keeping the overall installation depth short, a combination valued on mid-power positioning axes inside compact automation cells.

Thermal dissipation depends on natural convection, so clearance should be left around the housing fins. The encoder connector is rotatable 240°, so the feedback cable can exit in a convenient direction without stressing the conductors. Position data are transmitted through the Hiperface interface, and the internal sensor divides each mechanical turn into 16 signal periods. Because the sensing element is capacitive, it remains accurate when exposed to machine vibration or magnetic brake fields. These feedback attributes, combined with winding code 0200 and the standard mechanical design, let the motor synchronize precisely with IndraDrive controllers during rapid acceleration profiles.

Control loops close easily because the encoder delivers absolute position in a single-turn format, avoiding the complexity of multi-turn memory when a simple homing sequence is sufficient. The unit ships without a holding brake, so a separate clamp or gravity counterbalance must secure loads during power isolation. An IP65 enclosure prevents dust ingress and low-pressure water jets from reaching internal components, while the plain shaft couples directly to belt pulleys or planetary gearsets. Continuous service is permitted in surrounding air from 0 to 40 °C, and this ambient band pairs with insulation class 155 to keep winding temperatures within safe margins under rated operation.