Product Description:

The MSK071E-0200-NN-S1-UP2-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As a purpose-built drive element, this unit converts electrical energy into controlled rotary motion for precision axes in automated manufacturing lines. It supports accurate positioning and repeatable speed profiles required by industrial automation systems. That role makes it suitable for packaging, handling, and indexing equipment that depends on smooth servo response.

The motor uses natural convection, so heat is removed through surface radiation and ambient airflow without auxiliary fans. A sealed housing rated at IP65 prevents dust ingress and protects the windings from water jets during washdown maintenance. Load holding is provided by an electrically released brake with 30 Nm of torque, keeping the axis fixed when the drive is de-energized. Mechanical coupling is provided by a shaft with keyway, which supports slip-free torque transmission to pulleys or gearboxes. Feedback is delivered through the Hiperface interface, and its optical sensor generates 128 signal periods per revolution for high-resolution position data. The standard design, 071 frame size, length code E, and winding code 0200 set the motor’s electromagnetic geometry and electrical characteristics while fitting compact machine layouts.

The encoder cable entry uses a 240° rotatable connector, allowing cable routing away from adjacent components while preserving minimum bend radii. The feedback system is single-turn, so within each revolution it captures one electrical cycle and provides consistent rotor position data to the drive during closed-loop control. The insulation system is rated to class 155, matching the permitted winding temperature rise for continuous service in ambient conditions of 0 to 40 °C. This layout supports compact machine designs where cable routing space is limited and stable thermal performance is required.