Product Description:

The MSK071E-0200-NN-S1-UP0-NNNN is a synchronous servomotor built by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It serves as the electromechanical axis in packaging machinery, pick-and-place gantries, and CNC tooling where repeatable positioning and rapid speed changes are required. By converting drive current into controlled torque, the unit supports automated motion profiles that improve throughput and positioning accuracy in industrial equipment.

The motor follows a standard mechanical design so mounting dimensions remain consistent across the series. Its cooling relies on natural convection, so no forced-air or liquid cooling circuit is required, and heat is dissipated through the housing surface during operation. The winding code 0200 identifies the electrical winding used for this motor, and output torque is transmitted through a shaft with a keyway for positive engagement with couplings, pulleys, or gearboxes. Feedback is provided by an optical encoder that generates 128 signal periods per electrical revolution, which helps reduce velocity ripple during low-speed movement. Cable routing is supported by a 240° rotatable encoder connector, allowing the plug to be oriented to suit the available machine space.

The encoder sends incremental and absolute position data over the Hiperface protocol. Because the sensing system is single-turn, it reports position within one mechanical rotation and is suitable for axes that complete a homing cycle after power-up. The motor is supplied without a holding brake, which reduces added inertia and avoids brake wear in systems that use external load-holding devices. The compact size 071 housing with length E provides a longer motor body within this frame, which supports applications that need steady torque from a compact servo package.