Product Description:

The MSK071E-0200-NN-M2-UP1-RNNN servomotor is built by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. This IndraDyn S unit supplies precise torque and speed control for automated packaging stations, pick-and-place robots, and general axis drives on CNC machinery. When paired with a compatible drive controller, it converts commanded current into repeatable shaft motion for closed-loop positioning, indexing, and regulated speed operation. Its synchronous design also supports stable response during frequent starts, stops, and dwell periods on axes that require accurate motion control throughout repeated production cycles.

The motor is cooled by natural convection, so heat leaves the frame without auxiliary fans or liquid circuits. An enclosure rating of IP65 helps keep out dust and low-pressure water jets, allowing the motor to be mounted close to the machine. The electrically released holding brake provides 23 Nm of torque to secure vertical or suspended loads when power is removed, which helps prevent unwanted axis movement during a stop. Position feedback is transmitted through the EnDat2.1 interface, and the encoder provides 2048 signal periods per mechanical revolution while retaining multi-turn position data after shutdown. A rotatable connector supports flexible cable routing where installation space is limited or cable entry angles are restricted.

The mechanical layout uses increased concentricity to reduce shaft-end runout and support accurate coupling alignment. Power is transferred through a shaft with keyway, which allows direct mounting of pulleys, pinions, and similar drive elements. Insulation in thermal class 155 supports continuous-duty operation under normal loading conditions. The motor is intended for ambient temperatures from 0 to 40 °C, making it suitable for typical indoor industrial environments. The E-length housing in the 071 frame offers a balanced combination of torque density and rotor inertia for mid-range axis applications.