Product Description:

The MSK071E-0200-NN-M2-UG2-RNNN is an IndraDyn S synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. The unit is a torque-dense rotary actuator used in industrial automation to position machine axes with high precision and repeatability. With an integrated feedback encoder and a compact electromagnetic design, it supports closed-loop motion control in packaging lines, metal-cutting centers, and assembly cells. Its compact format also suits tightly spaced axis arrangements where accurate acceleration, braking, and repeatable stopping are required. This type of motor is commonly used where smooth torque delivery and precise position correction are needed throughout repeated production cycles.

Thermal management is handled through natural convection, so the motor requires unobstructed airflow around the housing. Position feedback is supplied by an optical encoder with 2048 signal periods per revolution and an EnDat2.1 serial interface, allowing parameter tracking without separate batteries. An electrically released holding brake provides 30 Nm of static torque so vertical loads remain secure when power is removed. The plain shaft simplifies coupling to gearboxes or timing pulleys, while the IP65 housing helps keep dust and low-pressure water jets away from internal windings. The integrated encoder and brake support controlled motion on vertical and horizontal axes without separate feedback devices.

The encoder stores position across power cycles with its multi-turn absolute design, and its connection uses a 240° rotatable plug to accommodate tight cabinet layouts. The plug orientation also makes cable routing easier where clearances around adjacent motors, guards, or machine frames are limited. The 0200 winding matches the E-length frame and size 071 laminate stack, helping balance inertia and continuous output. The motor uses an increased concentricity design, and insulation class 155 supports higher winding temperatures during peak duty. The permitted ambient operating temperature range is 0 to 40 °C, which fits common factory conditions for multiaxis equipment and general production machinery.