Product Description:

The MSK071E-0200-NN-M2-UG0-RNNN is an IndraDyn S synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts regulated current from a compatible drive into tightly controlled rotary motion. This lets the motor support coordinated axis movement in automated equipment. It is used in pick-and-place robots, packaging stations, and gantry systems that require repeatable positioning and rapid speed changes. The motor is intended for closed-loop motion tasks where stable torque delivery and accurate feedback are important throughout continuous industrial operation and frequent cycling.

Thermal management is handled by natural convection, so heat exits the stator without auxiliary blowers. The housing carries a protection rating of IP65, which blocks dust ingress and water jets encountered on industrial equipment. Position data travels over EnDat2.1, a bidirectional interface that links the optical sensor directly to the drive controller for high-integrity feedback exchange during speed and position control. The encoder provides 2048 signal periods and stores position as a multiturn absolute system, which supports startup without a homing move. A field-installable connector that is rotatable through 240° lets the feedback cable exit in the best direction for tight machine frames and restricted mounting spaces. The winding code 0200 sets the electrical constants, motor size 071 with length E sets the mechanical envelope, increased concentricity reduces radial runout, and the unit is supplied without a holding brake to minimize rotating inertia and support applications that do not require load holding at standstill.

The drive end uses a plain shaft, allowing backlash-free coupling through clamps or collets. That arrangement also works well where compact couplings are preferred over keyed shaft connections. Continuous duty is specified for ambient conditions of 0 to 40 °C, so full torque remains available in standard factory climates. Class 155 insulation tolerates elevated winding temperatures and supports reliable operation during high-cycle duty. The shaft arrangement is well suited to direct coupling in compact multi-axis assemblies where precise alignment and smooth transmission are important.