Product Description:

The MSK071E-0200-NN-M1-UP2-NNNN is an IndraDyn S synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. With motor size 071 and length code E, it converts electrical energy into controlled rotary motion for packaging systems, handling equipment, and machining axes. Integrated feedback and a matched winding package allow the motor to support accurate velocity and torque control during repeated starts, stops, and position changes. This makes it suitable for applications that require consistent motion response and stable closed-loop operation.

Its thermal behavior relies on natural convection, so the housing must have enough surrounding air space to release heat during operation. The encoder connector can be rotated through 240°, which helps when cable routing space is limited. Position data are transmitted over the Hiperface interface, and the encoder provides 128 signal periods per mechanical revolution for feedback processing in the drive. An electrically released brake provides 30 Nm of holding torque, which helps keep a vertical or suspended load in place when drive power is removed. The combination of feedback and holding force supports controlled stopping and secure standstill behavior in motion systems.

The motor uses the Standard mechanical variant, so its flange dimensions, pilot diameter, and mounting threads follow the normal dimensions for this frame. Inside the encoder, an optical scanning system works with a multi-turn absolute counter to retain position information after power cycling. Stator configuration 0200 matches the electrical characteristics expected by compatible IndraDrive amplifiers and supports balanced current loading. Drive torque is transmitted through a shaft with keyway, which provides positive engagement with a hub, pulley, or coupling. This shaft style helps reduce slip under changing load conditions and supports reliable torque transfer during acceleration and deceleration.