Product Description:

The MSK071E-0200-NN-M1-BG1-NNAN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat and placed within the MSK IndraDyn S Synchronous Motors series. It is intended for precision positioning in automated machinery where a drive controller issues torque and velocity commands that the motor must follow accurately. By combining a compact stator package with series-standard winding code 0200, the unit delivers the dynamic response required for pick-and-place arms, form-fill-seal equipment, and multi-axis gantry tables. Its compact layout also suits machine sections where installation space is limited but accurate axis control is still required.

Heat is removed solely by natural convection, meaning the housing surface dissipates losses without fans or liquid circuits. The enclosure carries an IP65 rating, protecting internal windings and the optical encoder from dust ingress and water jets encountered on production floors. To secure vertical loads during downtime, an electrically released brake supplies 23 Nm of static holding torque. Position data and commutation signals reach the drive over the Hiperface protocol, and this interface pairs with an optical sensor that delivers 128 signal periods per revolution for high-resolution feedback after interpolation. This arrangement supports stable closed-loop motion across a wide speed range.

The rotor uses a Reduced Run-Out geometry so radial wobble remains minimal when the plain shaft is coupled to gearboxes or pulleys. Absolute position tracking spans 4096 turns because the encoder is Multiturn Absolute, which lets the control system retain position information after a power cycle. The permitted ambient operating range is 0-40 °C, and within this band the internal Class 155 insulation keeps conductor temperature within its allowable limit during continuous duty. A B-side power connector helps with cable routing in compact cabinets, and the motor can be mounted without auxiliary airflow hardware.