Product Description:

The MSK071E-0200-FN-M1-UP2-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As a high-performance actuator for industrial automation, the unit converts drive commands into accurate rotation and torque for gantries, packaging axes, and general motion platforms. It has motor length E and follows the standard mechanical design of the series, allowing straightforward integration into machines that already use compatible power and feedback cabling.

Thermal management is handled by liquid cooling, a requirement of the FN configuration that stabilizes winding temperature during continuous duty. The stator uses winding code 0200, which corresponds to the electrical resistance and inductance used with matched IndraDrive power stages. To simplify cable routing, the encoder connector is rotatable through 240°, so the feedback plug can be positioned without placing unnecessary strain on the cables. Position data travel over the Hiperface interface, and the integrated encoder resolves the rotor angle into 128 signal periods, giving the controller fine incremental information for smooth velocity loops. The keyway shaft transmits torque directly to couplings while maintaining a positive mechanical lock.

The encoder uses an optical sensing method, and its multi-turn absolute format retains position across power cycles, eliminating homing moves after shutdowns. Load holding is provided by an electrically released brake with 30 Nm of static torque, supporting vertical axes when drive power is removed. Frame size 071 keeps the motor compact while still supplying the torque associated with the E-length core. Standard housing geometry and the keyway shaft allow the servomotor to mount on conventional machine flanges without special interface hardware.