Product Description:

The MSK071E-0200-FN-M1-UG0-NNNN is an IndraDyn S synchronous servomotor supplied by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It is intended to provide precise rotary motion for positioning and velocity control in automated machinery such as packaging stations, pick-and-place axes, and metal-working spindles. When paired with a compatible drive, it supports closed-loop motion tasks that require fast response, stable speed regulation, and accurate stopping behavior. This operating profile suits equipment that must repeat the same movement sequence over long production runs while maintaining consistent axis performance.

This motor is equipped with liquid cooling, so thermal energy is removed by circulating coolant through the housing rather than relying on ambient air. A protection rating of IP65 seals the stator against dust and low-pressure water jets, allowing installation near cutting fluids or wash-down areas. The unit is delivered without a holding brake, so mechanical locking or drive torque must secure the load during power-off conditions. Position feedback is handled through the Hiperface serial interface, and the built-in optical encoder delivers 128 signal periods per revolution to support fine resolution in servo loops. Electromagnetic behavior follows winding code 0200, and the insulation system uses thermal class 155 for continuous operation at elevated winding temperatures.

The feedback assembly uses optical technology with a 240° rotatable connector, so cabling can exit in multiple directions inside tight cabinets. Absolute positional data is retained over many turns because the encoder is multi-turn absolute, eliminating the need for homing after a shutdown. The motor corresponds to size 071 with length code E, which helps it fit installations built around that frame geometry. A plain shaft transmits torque directly to couplings or pulleys without a keyway. Continuous duty is supported within an ambient range of 0 to 40 °C, and operation inside this band helps avoid derating while liquid cooling controls internal temperature.