Product Description:

The MSK071D-0450-NN-S1-UP0-NNNN synchronous servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MSK IndraDyn S Synchronous Motors series. As a rotary actuator for closed-loop motion systems, it converts drive output from compatible controllers into precise shaft rotation for indexing tables, packaging axes, and pick-and-place stations in industrial automation. It is intended for applications that require repeatable speed control and accurate positioning during continuous machine cycles.

The motor relies on natural convection cooling, so heat is dissipated through the housing surface without forced air or liquid channels. A rotatable feedback plug simplifies cable routing, and the connector swivel range is rotatable through 240°. Position data is delivered over the Hiperface serial interface, allowing commutation data and absolute angle information to be transmitted through the same feedback system. Inside the encoder, optical scanning tracks 128 signal periods, which supports smooth velocity control and stable position feedback. The encoder operates in single-turn mode, so absolute position is available within one mechanical revolution, while multi-turn counting must be handled by the control if needed. Winding code 0450 identifies the electrical characteristics used with compatible IndraDrive amplifiers.

The motor is supplied without a holding brake, so static holding torque must be provided by the drive or by an external locking device when the axis is stopped. Its motor length D housing is paired with the motor size 071 frame, which suits medium-power axes while keeping the standard mounting interface used across the series. The output uses a shaft with keyway, allowing secure torque transmission to belt drives, couplings, and gearboxes. This shaft arrangement is suitable for applications that require a positive mechanical connection between the motor and the driven load.