Product Description:

The MSK071D-0300-NN-M1-AG0-NNAN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Within an automation cell, the motor converts drive commands from a controller into precisely metered rotary motion, enabling coordinated positioning and stable velocity profiles at each axis. Its mechanical outline, winding code 0300, and D-length housing help match the motor to compact packaging machines, material-handling gantries, and other servo-driven equipment that depends on repeatable motion. Because it is intended for closed-loop servo use, the motor is suited for axes that must accelerate, settle, and track commanded positions without excessive overshoot.

Heat is removed by natural convection, so airflow around the housing must remain unobstructed during operation. The sealed enclosure carries an IP65 rating, which blocks dust entry and protects internal components against water jets in typical industrial environments. Position data are returned through a Hiperface interface, and the integrated encoder delivers 128 signal periods per revolution with Optical scanning for precise feedback to the drive. The encoder signal gives the drive a stable reference for speed regulation and position correction during indexing, contouring, and synchronized transfer tasks. Power cabling connects on the A-side of the stator, which simplifies routing in compact cabinets and helps keep power and feedback paths physically separated.

The sensor is a Multiturn Absolute device that records up to 4096 revolutions, so homing after power loss is unnecessary and the controller can recover position data immediately at startup. A plain shaft avoids keyway stress and supports low radial error when the motor is coupled to precision gearheads or rigid shaft couplings. Insulation system class 155 supports continuous operation while the motor remains within an ambient range of 0 to 40 °C. The motor uses frame size 071 and is supplied without a holding brake, so any static load retention must come from the drive or an external mechanical device.