Product Description:

The Bosch Rexroth Indramat MSK071D-0200-NN-S2-UP0-RNNN belongs to the MSK IndraDyn S Synchronous Motors series. This servo motor is built for closed-loop automation axes where accurate speed, position, and torque control are required. With integrated feedback and a keyed shaft, the unit translates drive commands into precise mechanical motion for packaging machinery, material-handling gantries, and similar automated equipment. Its synchronous design also supports responsive motion on axes that start, stop, and reverse frequently during production.

Heat is removed through natural convection, so installation must allow free airflow rather than rely on external fans or coolant lines. The motor housing carries an IP65 rating, preventing dust ingress and low-pressure water jets from affecting internal components. Position data travel over the EnDat2.1 digital interface, delivered by an optical encoder that produces 2048 signal periods per mechanical revolution. Wiring is simplified by a connector that can be rotated through 240°, permitting cable exit in the preferred direction inside tight machine frames. The winding code 0200 matches the drive parameters for resistance and inductance, and the feedback arrangement supports smooth control at low operating speeds.

The motor is built for increased concentricity, and the output interface is a shaft with keyway that simplifies coupling to pulleys or gearboxes. Because the encoder is single-turn, the control system tracks position within one revolution and must reference after each power cycle. There is no internal holding brake, so static loads must be secured by the drive or external clamps. Thermal insulation is class 155, enabling continuous operation across an ambient range of 0 to 40 °C without winding degradation. The D length and 071 frame size keep inertia moderate while supporting the torque level expected of the IndraDyn S family.