Product Description:

The MSK071D-0200-NN-S1-UP1-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It is intended for precise position and velocity control in industrial automation cells such as packaging stations, pick-and-place axes, and other coordinated motion systems. The motor works with IndraDrive controllers by providing a digital feedback channel and an electromechanical holding brake for vertical or high-inertia loads. This arrangement supports controlled motion during operation and secure holding when the axis is stopped.

Its cooling relies on natural convection, so heat is dissipated through the housing without external fans or liquid circuits. The spring-applied, electrically released brake delivers 23 Nm of static torque to hold the axis when power is removed. Position feedback is provided by a Hiperface encoder with 128 signal periods per revolution, and the optical scanning principle supports high signal integrity. The feedback connector is rotatable through 240°, which helps with cable routing in confined cabinets. The encoder operates in single-turn mode, so one absolute code is assigned to each mechanical revolution, and the housing follows the standard mechanical outline used for this frame size.

The mechanical interface uses a shaft with a keyway, allowing positive-lock coupling to gearboxes or pulleys without relying on clamping collars alone. Frame size 071 sets the flange diameter and bolt circle, while motor length D provides a longer active section in this housing. The longer stack also provides more active material than shorter motors in the same frame. The motor uses winding code 0200, which matches the electrical characteristics expected by compatible inverters and supports the intended torque-speed curve during normal operation.