Product Description:

The MSK071D-0200-NN-S1-UG0-NNNN is a servo motor manufactured by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It serves as a drive element for automated equipment that needs accurate positioning and repeatable speeds, such as pick-and-place gantries or forming presses. When connected to an IndraDrive controller, the motor delivers commanded motion while its integrated encoder feeds back instantaneous shaft position, enabling the control loop to correct deviations and keep the load on its programmed path.

The motor frame is classified as size 071, a housing diameter that balances torque density with compact mounting. Its electromagnetic profile uses winding code 0200, which sets resistance, inductance, and rated current so the drive can match output to thermal limits. Heat is removed solely by natural convection, making the unit suitable for enclosures that lack forced-air cooling. Velocity and position data reach the drive over the Hiperface serial interface, and the feedback device resolves motion into 128 signal periods per revolution, allowing fine incremental control even at low speeds. The design is standard, and the mechanical length follows the D code, so the shaft protrusion and stator stack align with other motors in the series.

The feedback package relies on an optical scanning principle that minimizes electrical noise in the position data. Its connector is rotatable, 240°, which allows the cable exit to be oriented away from tight bends inside crowded panels. Because the encoder is a single-turn type, absolute position is reported for one full rotation, and multi-turn tracking must be handled by the drive if required. A plain shaft transmits torque without a key, favoring couplings that clamp concentrically on the journal. The motor is built without a holding brake, so any static load must be secured by external means.