Product Description:

The MSK071D-0200-NN-M1-UP1-NNNN is an IndraDyn S synchronous servomotor built by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. The unit provides closed-loop torque and position control for conveyor axes, pick-and-place gantries, and other precision stations in automated equipment. Its permanent-magnet rotor and integrated feedback electronics support fast response during indexing, synchronized transfer, and repeat positioning. The compact housing also suits machine layouts where mounting space is limited and cable routing must stay close to the axis.

Natural convection cooling lets the motor shed heat through its housing, so it can operate without external fans when the ambient temperature remains within 0 to 40 °C. The standard mechanical design shares mounting points with the rest of the MSK line, which helps keep installation consistent across related motor sizes. A sealed housing with an IP65 rating helps block dust and water jets in industrial work areas. Torque is transmitted through a shaft with a keyway, and an electrically released brake provides 23 Nm of holding torque during power-off stops. Class 155 insulation supports continuous-duty operation, and position and motor identification data are transmitted to the drive through the Hiperface protocol on the hybrid connector.

The feedback system uses an optical scanner with 128 signal periods per revolution and multiturn absolute feedback, allowing the drive to retain position information across more than one shaft rotation. This arrangement gives the control system stable position data during repeated direction changes and short move cycles. A connector that can rotate through 240° helps route cables in confined spaces where nearby guards or cable carriers limit entry angles. The winding code 0200 matches the motor's electrical characteristics to compatible IndraDrive amplifier current ranges, and the D-length stator adds active iron for higher peak torque without changing the mounting geometry. Optical encoder operation also avoids magnetic saturation effects that can reduce measurement quality in some sensing methods.