Product Description:

The MSK071D-0200-FN-S1-UG0-NNNN servomotor is produced by Bosch Rexroth Indramat and belongs to the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S synchronous servomotor, it delivers precise torque and velocity control for automated positioning axes, packaging stations, and similar motion tasks. It is designed for use with IndraDrive controllers, where closed-loop operation can be tuned for repeatable performance in industrial automation.

The motor’s thermal profile is managed by liquid cooling, which carries heat away from the stator jacket and permits higher continuous current density than air-cooled units. A 240° rotatable encoder connector lets cable outlets be aligned inside tight machine spaces without stressing the harness. Rotor position is relayed through a Hiperface interface that supports both incremental and absolute data streams, and a resolution of 128 signal periods per mechanical revolution is generated by an optical scanning system. The 0200 winding code indicates the electrical resistance and inductance used with drives that operate on moderate intermediate-circuit voltages, while the 071 frame size and D length suit mid-range gantry and transfer modules.

The mechanical side includes a plain shaft for backlash-free coupling, and the construction follows a standard design layout so mounting dimensions correspond to IEC patterns. Because the unit is supplied without a holding brake, vertical loads must be secured externally during power loss. The housing is rated IP65 to resist dust and water jets, and reliable operation is permitted at ambient temperatures from 0–40 °C. Internal insulation materials meet Class 155 thermal limits, allowing winding temperatures up to 155 °C without insulation breakdown. The single-turn encoder format provides position information within one mechanical revolution, and the liquid circulation ports are suitable for closed coolant circuits used in high-duty machining centers.