COVID-19 Update: Wake Industrial is open and available to support your automation needs.
The MSK071C-0450-NN-M1-UG0-NNNN motor is a member of the MSK motor series designed by Bosch Rexroth as a reliable automation technology with wonderful features that render complex industrial activities simple.
The MSK071C-0450-NN-M1-UG0-NNNN features a standard multi-turn encoder system with the ability to aid motor positioning within its potential 4,096 mechanical rotations. The encoder system also provides speed control for the motor through the drive control device.
The motor makes use of a plain shaft as its output shaft through which it is attached to the machine intended to be driven. As part of its protective features, the MSK071C-0450-NN-M1-UG0-NNNN was designed as an IP65 motor for adequate protection against external contacts, foreign substances including liquids such as water, and dust.
The MSK071C-0450-NN-M1-UG0-NNNN motor has a maximum torque of 44.0Nm, maximum current of 40.1A, makes use of the 60K housing temperature and 100k winding temperature for the regulation of its technical data, uses a natural convection cooling system and a thermal overload regulator with an optional fan unit for internal heat regulations, uses power connectors for the temperature sensor and another connector for the encoder system, and its recommended environmental conditions for optimal functioning is an ambient temperature ranging from 0°C to 40°C at a height between 0m to 100m above the sea level. Generally, the black body varnish of members of the MSK motor series protects them against most liquids excluding concentrated acids, and a layer of paint not more than 40µm thick can be put on the varnish by the user. Users can also make use of air sealing connections to provide extra-protection especially for the shaft bearings.
|Cooling Mode:||Natural Convection|
|Encoder:||Optical encoder, multiturn-absolute Hiperface, with 128 increments|
|Electrical Connection:||Plug, rotatable 240 degrees|
|Shaft:||Plain shaft with shaft sealing ring (standard)|
|Holding Brake:||Without holding brake|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved