Product Description:

The MSK071C-0200-NN-S3-UG0-NNNN is a servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. In automated machinery, it converts drive commands into precise rotary motion for packaging, conveying, and indexing applications. Its integrated encoder returns position and speed feedback so axis controllers can correct motion in real time and keep repeated moves consistent. Closed-loop feedback also helps the drive respond to changing load conditions during acceleration, deceleration, and steady operation.

Cooling is handled by natural convection, so heat leaves through the motor frame without fans or liquid circuits. The 0200 winding suits medium-torque tasks, and the standard design uses the normal MSK housing outline in size 071 with length C. Position data is transmitted through a Hiperface interface, which carries commutation and diagnostic information over a serial connection. The encoder uses 16 signal periods and capacitive sensing to detect rotor position with stable electrical feedback. Because it is a single-turn device, it reports absolute position within one revolution, so any multi-turn counting must be handled by the control system.

The housing has an IP65 rating, which blocks dust ingress and protects against low-pressure water jets in typical industrial environments. A plain shaft supports clamp-style or shrink-fit couplings and avoids the stress concentrations associated with keyways. Thermal class 155 supports winding temperatures consistent with F-class insulation limits during normal operation. The specified ambient operating range is 0 to 40 °C, and the motor is supplied without a holding brake, so static loads must be secured by external clamping or drive torque. The encoder connector can rotate 240 degrees, which helps with cable routing where enclosure space is limited.