Product Description:

The MSK071C-0200-NN-S2-UP0-RNNN belongs to the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. It is a synchronous servo motor intended for axis control in packaging lines, handling systems, and other automation cells where fast position loops and compact footprints are required. By combining a 071 frame size with length code C, the unit provides the continuous torque expected from a mid-range servo motor while remaining short enough for shallow machine spaces. Its compact format makes it suitable for installations where adjacent components leave limited clearance around the motor body.

This motor is cooled by natural convection, so heat leaves the housing without forced airflow, and it can be mounted where ambient temperatures stay within 0 to 40 °C. The enclosure carries an IP65 rating, blocking dust and low-pressure water jets during washdown or material-handling duty. A rotatable 240° encoder connector simplifies cable runs because the plug can be turned after installation. Position data move through the EnDat 2.1 interface, allowing bidirectional communication with compatible drives for electronic nameplate reading and fine interpolation. Increased concentricity in the mechanical design reduces shaft runout and helps maintain smooth rotation during rapid motion.

The feedback system resolves motion into 2048 signal periods per revolution; with an optical scanning method and a single-turn track, it supplies absolute position over one mechanical turn without batteries. A shaft with keyway transmits torque to pulleys or couplings and helps prevent slip under start-stop cycles. This output style is well suited for applications that use keyed hubs or rigid mechanical couplings. Thermal endurance matches insulation class 155, which supports high winding temperatures before insulation damage. The selected winding also sets the resistance and inductance values used for this stator.