Product Description:

The MSK071C-0200-NN-M1-UP2-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As a permanent-magnet servo unit, it provides precise position and speed control for automated machinery such as gantry axes, packaging stations, and tool heads. Its integrated feedback and compact build allow direct installation near the driven load while preserving closed-loop accuracy and fast cycle times. When paired with a compatible servo drive, it supports smooth low-speed motion as well as repeatable starts and stops during frequent duty cycles.

This model is supplied in the standard mechanical design and uses natural convection to move heat away from the stator. The housing carries a IP65 rating, so dust and low-pressure water jets are kept away from internal components. Mechanical power is transferred through a shaft with keyway, which supports common couplings and torque transmission methods. The internal winding is coded 0200, and it works with the C-length stack and size 071 frame to set the motor's performance characteristics. An electrically released brake provides 30 Nm of holding torque to secure vertical or indexing loads when drive power is off. Because airflow is unobstructed, no external blower or liquid cooling loop is required.

Electrical interfacing is handled by a Hiperface optical encoder. It provides 128 signal periods per revolution, supports multi-turn absolute tracking, and uses a rotatable 240° connector to ease cable placement in tight panels. The motor windings use insulation rated to class 155, allowing long-term operation within the specified ambient range of 0-40 °C without undue thermal stress. This feedback arrangement helps the drive controller monitor rotor position continuously during acceleration, deceleration, and standstill.