MSK071C-0200-NN-M1-UG2-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911325654
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
6 Seconds
The Bosch Rexroth Indramat MSK071C-0200-NN-M1-UG2-NNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. It features a plain shaft, an IP65 protection rating, and uses natural convection cooling. The motor is equipped with a multiturn absolute optical encoder with a Hiperface interface and a holding brake that provides 30 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK071C-0200-NN-M1-UG2-NNNN servo motor is manufactured by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. Classified as an IndraDyn S synchronous servo motor, this model is used wherever closed-loop rotary motion is required for packaging axes, pick-and-place heads, or linear transfer stations. Its standard mechanical design supports direct mounting to precision gearboxes or belt drives while maintaining the dynamic response expected from a permanent-magnet synchronous motor in modern automation cells. This type of motor is commonly paired with servo drives that regulate torque, speed, and position in tightly coordinated motion sequences.
The motor is built on the 071 frame with a length code of C, giving a moderate inertia profile suited to mid-range loads. Heat is removed by natural convection, so surrounding airflow must remain unobstructed during installation. An enclosure rating of IP65 protects the windings and bearings against dust ingress and low-pressure water jets. This protection helps the motor operate in machine sections where airborne debris or light washdown exposure may be present. Continuous operation is permitted over an ambient range of 0–40 °C without output derating. Winding code 0200 allows the control system to match current limits and commutation tables automatically. A plain shaft transmits torque without keyways to minimize coupling backlash.
Position feedback is generated by an optical encoder that delivers 128 signal periods per revolution and reports absolute multi-turn data through the Hiperface interface; its connector can be rotated 240° to ease cable routing. This feedback arrangement supports precise commutation and stable position control across changing operating speeds. The insulation system is rated at 155, which corresponds to typical F-class thermal endurance. Motion can be held when power is removed by an electrically released brake that supplies 30 Nm of static torque, which is useful on vertical axes or during emergency stops.
Frequently Asked Questions about MSK071C-0200-NN-M1-UG2-NNNN:
Q: What shaft type is featured on the MSK071C-0200-NN-M1-UG2-NNNN motor?
A: This model is equipped with a plain shaft for direct coupling applications.
Q: What type of encoder and interface are used in the MSK071C-0200-NN-M1-UG2-NNNN?
A: The MSK071C-0200-NN-M1-UG2-NNNN uses a multiturn absolute optical encoder with Hiperface interface for high-precision feedback.
Q: What is the holding brake specification for the MSK071C-0200-NN-M1-UG2-NNNN?
A: This motor includes an electrically-released holding brake with a torque of 30 Nm.
Q: What is the protection rating of the MSK071C-0200-NN-M1-UG2-NNNN motor?
A: The MSK071C-0200-NN-M1-UG2-NNNN features an IP65 protection rating for resistance to dust and water ingress.
Q: What cooling method is used for the MSK071C-0200-NN-M1-UG2-NNNN motor?
A: This model supports natural convection cooling but requires a cooling function code FN for optimal operation.
