MSK071C-0200-NN-M1-UG0-NSNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321167
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
26 Seconds
The Bosch Rexroth Indramat MSK071C-0200-NN-M1-UG0-NSNN is a synchronous servomotor in the MSK IndraDyn S Synchronous Motors series. It features natural convection cooling, a plain shaft, and an IP65 protection rating. The motor uses a multiturn absolute optical encoder with Hiperface interface and has no holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK071C-0200-NN-M1-UG0-NSNN is a synchronous servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. The unit belongs to the IndraDyn S product line and provides closed-loop torque and velocity control for repeatable indexing, contouring, and pick-and-place movements in industrial automation systems. Its synchronous design allows the connected drive to maintain accurate rotor positioning during rapid starts, stops, and speed changes on dynamic axes. That makes it suitable for packaging modules, transfer stations, and similar machinery that depends on repeatable closed-loop motion under varying loads.
Heat generated by the stator is removed through natural convection, so additional fan assemblies are not required when the motor is mounted in free-air orientation. An IP65 enclosure rating protects the windings, bearings, and encoder against dust ingress and low-pressure water jets encountered during routine washdown. Rotor position is detected by a Hiperface optical encoder that resolves 128 signal periods per mechanical turn, giving the connected drive controller fine interpolation for precise motion control. The feedback connector is rotatable, 240°, so cable routing can follow the machine layout without placing unnecessary stress on the conductors. Optical sensing and absolute position feedback allow the drive to recover position information after power cycling without a new reference run.
The axis is delivered without a holding brake, so static load security must be provided by external clamps or drive current when the motor is idle. Safe operation is specified for ambient temperatures from 0 to 40 °C, and insulation class 155 supports elevated internal winding temperatures during continuous duty. The motor uses winding code 0200, which corresponds to electrical values matched to compatible IndraDrive power stages. It also uses the 071 frame with a C-length housing and a plain shaft for direct coupling to gearboxes or belt pulleys without keyways. In applications with vertical or suspended loads, any standstill holding function must come from the machine design or the drive system.
Frequently Asked Questions about MSK071C-0200-NN-M1-UG0-NSNN:
Q: How is the MSK071C-0200-NN-M1-UG0-NSNN motor cooled?
A: The MSK071C-0200-NN-M1-UG0-NSNN uses natural convection cooling to regulate temperature during operation.
Q: What type of shaft is included on the MSK071C-0200-NN-M1-UG0-NSNN?
A: This motor features a plain shaft configuration.
Q: Does the MSK071C-0200-NN-M1-UG0-NSNN motor include a holding brake?
A: No holding brake is included with the MSK071C-0200-NN-M1-UG0-NSNN model.
Q: What type of encoder technology does the MSK071C-0200-NN-M1-UG0-NSNN use?
A: The encoder used is a multiturn absolute optical encoder with Hiperface interface and 128 signal periods.
Q: What is the protection rating of the MSK071C-0200-NN-M1-UG0-NSNN?
A: The MSK071C-0200-NN-M1-UG0-NSNN provides IP65 protection rating, guarding against dust and low-pressure water jets.
