Product Description:

The MSK071C-0200-NN-M1-AG1-NNAN is a rotary servomotor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts electrical energy into controlled rotary motion for positioning and speed-regulated tasks in automated machinery, packaging lines, and handling systems. The motor is intended for use with IndraDrive controllers, where closed-loop current, speed, and position control support repeatable axis movement. Its plain shaft allows direct coupling to gearboxes or timing pulleys, and the compact housing suits installations where space around the drive train is limited.

With size code 071, the stator diameter balances continuous torque with installation space, while winding code 0200 sets the electrical characteristics expected by the drive electronics. Heat is removed by natural convection, so the housing needs free surrounding air instead of auxiliary cooling equipment. The enclosure has an IP65 protection rating to resist dust and water jets in demanding production areas. The permitted ambient temperature range is 0 to 40 °C, which allows normal operation without derating when that limit is observed. The motor also uses a C-length stack, an A-side circular power connector, and reduced runout machining for accurate alignment and orderly cable routing.

Feedback is provided through a Hiperface interface with optical scanning and multi-turn absolute position tracking, so the drive can retain rotor position information after a power cycle. During standstill, an electrically released brake supplies 23 Nm of holding torque to secure vertical or indexing loads. Insulation Class 155 supports the winding temperatures associated with repeated acceleration and deceleration, while the passive cooling layout keeps the motor mechanically simple. That feedback arrangement is useful on axes that must resume position control quickly after a restart.