MSK070D-0150-NN-M3-UG0-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384045
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
29 Seconds
The Bosch Rexroth Indramat MSK070D-0150-NN-M3-UG0-NNNN is a synchronous servomotor from the MSK IndraDyn S Synchronous Motors series. It features natural convection cooling and a plain shaft design. The motor is equipped with a rotatable 240 degree encoder connector and uses Hiperface encoder interface with capacitive technology and multiturn absolute resolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK070D-0150-NN-M3-UG0-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. The unit serves as a torque source in industrial automation, where a drive supplies controlled current and the motor delivers rapid, repeatable positioning without mechanical backlash. Its electromagnetic design supports closed-loop speed and position regulation, allowing the motor to integrate into gantries, pick-and-place modules, or feed axes that demand consistent dynamic response. It is suited for automated handling systems that require accurate acceleration, deceleration, and repeatable stopping behavior across changing loads.
Thermal management is handled by natural convection, meaning the housing dissipates heat to the surrounding air without external fans or liquid circuits. Feedback to the drive is carried on the Hiperface interface, and this protocol transmits absolute position data and motor data over two differential pairs. The encoder head resolves rotor position with 16 signal periods, and its sensing method is capacitive, so magnetic fields or light oil films do not disturb the measurement. A rotatable 240° connector lets the feedback cable exit in several orientations, while frame code 070 identifies the stator diameter used with standard MSK mounting flanges. This cable outlet arrangement also helps route wiring in tighter machine spaces.
The multiturn encoder tracks up to 4,096 shaft revolutions and reports the value as multiturn absolute data, eliminating homing sequences after power loss. Axial length class D gives the motor a longer active stack than shorter motors in the same frame, which increases continuous torque capability without changing the mounting pattern. Mechanical power is transmitted through a plain shaft, which facilitates direct coupling with clamping hubs or toothed belts. This shaft style supports couplings that rely on clamping force instead of keyed engagement. The motor is supplied without a holding brake, so static load retention must be provided by the drive or an external locking device, and winding code 0150 corresponds to the electrical resistance and inductance values used by the drive.
Frequently Asked Questions about MSK070D-0150-NN-M3-UG0-NNNN:
Q: What cooling method is used in the MSK070D-0150-NN-M3-UG0-NNNN motor?
A: The MSK070D-0150-NN-M3-UG0-NNNN uses natural convection for cooling, operating without fans or forced air components.
Q: What type of encoder turn technology is implemented in this motor?
A: This model features a multiturn absolute encoder for accurate position detection over multiple turns.
Q: How adjustable is the encoder connector on the MSK070D-0150-NN-M3-UG0-NNNN?
A: The encoder connector can be rotated up to 240°, allowing flexible installation.
Q: Is a holding brake included in the MSK070D-0150-NN-M3-UG0-NNNN?
A: This motor is manufactured without a holding brake as part of its standard configuration.
Q: What type of shaft does the MSK070D-0150-NN-M3-UG0-NNNN feature?
A: The shaft on this model is a plain shaft, designed without keyways or other modifications.
