MSK070D-0150-NN-M1-UP0-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911315382
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK070D-0150-NN-M1-UP0-NNNN, produced by Rexroth Indramat, is a three-phase synchronous servomotor in the MSK series. The unit has a maximum torque of 52.5 Nm. The leakage capacitance of the motor is 5.0 nF. The device has a total of 6 pole pairs. The weight of the unit is 14 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK070D-0150-NN-M1-UP0-NNNN synchronous servomotor from Bosch Rexroth must be used only as intended to prevent property damage and/or personnel injury. This motor belongs to the MSK product group of such offerings from the manufacturer. The product must be installed only as per the regulations specified in the documentation. The device comes along with a grounding connection. This grounding conductor has to be permanently connected before switching ON the motor. The unit should not be used where there are chances of an explosive atmosphere during normal operation. Its faulty control can result in dangerous movements of the associated drive controller.
This motor must neither be opened nor disconnected in a pressurized state. The product is equipped with a type plate featuring its type designation and technical details. The device is designed to operate at a temperature ranging between 0°C and 40°C. The unit must have securely locked or tightened connectors during operation. It has very hot housing during and soon after operation. The motor does not have any holding brake. The product poses a risk of explosion hazard due to overloading. The device has four pole pairs. The unit makes use of a multiturn absolute encoder with a Hiperface interface. This MSK070D-0150-NN-M1-UP0-NNNN can be sent to the desired destination of your choice.
The product is subject to radial and axial forces on its shaft and bearings when it is in use. The device supports a maximum axial force of 60N. This force must never be over the highest permissible radial force. There should be no cooling lubricants or gearbox oil at the output shaft. The unit features a standard design with a fixed bearing on the B side. It is CE Certified, CUL Recognized and RoHS Compliant. This product is designed to support self-cooling. The device houses a temperature sensor in its stator. The servomotor comes with a one-year warranty backup.
