MSK070C-0450-NN-S2-UG1-RNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299885
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK070C-0450-NN-S2-UG1-RNNN is a powerful synchronous servomotor developed by Bosch Rexroth Indramat. The motor has a maximum speed of 6000 rpm. The maximum rated torque of the unit is 33 Nm. The winding resistance of the device is 0.55 Ohm at 20 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK070C-0450-NN-S2-UG1-RNNN synchronous servomotor offered by Bosch Rexroth has a 23Nm holding brake. The motor also has a single-turn absolute encoder with one distinguishable revolution and 2,048 signal periods. The product can operate at a maximum temperature of up to 55°C. The device has chances of featuring a discharge or leakage current over its conducting housing parts if its grounding conductor is not connected properly. Its housing should feature protection against corrosion due to aggressive materials like salt mists, cutting oils, lubricants and coolants. The holding brake in the unit is to be used only when the motor is in standstill mode and for performing drive internal check.
The motor flange holder must be checked to ensure that it is free of burrs before the motor mounting process. The product installation has to be carried out only in a clean and dry dust-free environment. The device connection must be done using readymade cables supplied by the manufacturer. The unit incorporates a terminal box that has to be opened only for connection purposes and must be closed as soon as the connection is done. Its electrical connections are to be done after ensuring proper mechanical assembly. The synchronous motor can be dispatched to any destination across the globe.
The product renders maintenance-free operation when it is used in compliance with the specified operating conditions. The device functionality tends to get adversely affected due to excessive dust, chips or dirt. The cooling fins of the unit are supposed to be cleaned at regular intervals to ensure a reasonably high heat emission surface. Its connection cables must be inspected for damage periodically and replaced if needed. This product will not run if the voltage supply or controller enable signal is missing. This device has to be secured against falling before removing the mechanical connections. The servomotor is available with warranty support for one year.
