MSK070C-0450-NN-M2-UG1-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299889
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
2 Seconds
The Bosch Rexroth Indramat MSK070C-0450-NN-M2-UG1-RNNN is a synchronous servomotor from the MSK IndraDyn S series with a plain shaft and increased concentricity design. It features natural convection cooling, a rotatable 240-degree encoder connector, and an optically based EnDat2.1 multiturn absolute encoder with 2048 signal periods. The motor includes an electrically released holding brake with a torque of 23 Nm and meets the IP65 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK070C-0450-NN-M2-UG1-RNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It converts electrical energy from an IndraDrive controller into controlled rotary motion for packaging lines, gantries, and pick-and-place modules. The motor uses an increased-concentricity design that keeps the rotor centered to reduce runout and vibration during high-speed cycles. That layout supports accurate positioning when the axis must repeat the same motion profile over long operating periods.
Cooling by natural convection moves heat from the housing to the surrounding air without fans, so the installation requires unobstructed airflow around the frame. The enclosure carries an IP65 rating, which keeps dust out and protects internal components from water projected by a nozzle. Position feedback is supplied by an optical encoder with 2048 signal periods, and when the drive interpolates that signal it supports stable low-speed control and precise speed regulation. Encoder data is transmitted through the EnDat2.1 bidirectional interface, allowing electronic nameplate communication and consistent feedback exchange with the controller. A spring-applied, electrically released brake provides 23 Nm of static torque to hold the load when power is removed, and the multiturn absolute function retains position information across shutdowns.
The motor uses size 070 with length code C, giving it a moderate footprint and torque density suited to medium-frame machinery. Its rotatable 240° encoder connector helps simplify cable routing where cabinet space is limited or where the motor is mounted close to guards and machine structures. Within an ambient range of 0 to 40 °C, the stator insulation class of 155 supports reliable electrical separation under normal thermal loading. A plain shaft output allows direct coupling to backlash-free clamping hubs, and winding code 0450 identifies the electrical values expected by IndraDrive parameter libraries. These features suit applications that need compact servo performance, reliable holding capability, and straightforward integration with the matching drive system.
Frequently Asked Questions about MSK070C-0450-NN-M2-UG1-RNNN:
Q: What type of encoder does the MSK070C-0450-NN-M2-UG1-RNNN motor use?
A: This model uses a multiturn absolute optical encoder with a resolution of 2048 signal periods.
Q: Does the MSK070C-0450-NN-M2-UG1-RNNN include a holding brake, and what is its torque?
A: The holding brake on this motor is electrically released and delivers 23 Nm of torque.
Q: How is the MSK070C-0450-NN-M2-UG1-RNNN motor cooled?
A: Cooling for this motor is handled through natural convection, so no active cooling is required.
Q: What shaft type does the MSK070C-0450-NN-M2-UG1-RNNN motor use?
A: This model features a plain shaft design for its mechanical output connection.
Q: What is the protection rating of the MSK070C-0450-NN-M2-UG1-RNNN motor?
A: The MSK070C-0450-NN-M2-UG1-RNNN has a protection rating of IP65, making it dust tight and protected against water jets.
