Product Description:

The MSK070C-0150-NN-M3-UP0-NNNN synchronous servomotor is produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As an electric drive component, this motor converts command signals from a drive controller into controlled rotary motion for positioning, velocity, and contouring tasks on automated machinery such as packaging lines, pick-and-place axes, and tooling spindles. By integrating feedback electronics with a compact stator frame, the unit delivers the response accuracy required for closed-loop industrial automation. Its layout supports precise motion control in machines that need repeatable speed changes and stable position tracking during continuous operation.

The motor housing relies on natural convection, so heat rises away from the stator without external fans. A rotatable 240° encoder connector helps simplify cable routing while preserving sealing surfaces for the IP65 enclosure rating, which blocks dust and low-pressure water jets. Position feedback is exchanged through the Hiperface interface, and this digital protocol carries both commutation data and device information. Measurement precision comes from the capacitive scanning method and a base resolution of 16 signal periods per mechanical revolution. Because the sensing element tracks multiple turns, the feedback device delivers multi-turn absolute position data even after power is cycled.

The output end uses a shaft with a keyway, matching couplings that depend on positive drive engagement. Motor size 070 with length code C gives a compact format for mid-range torque axes where installation space is limited. Winding code 0150 sets the electrical characteristics, and the insulation system is rated to class 155 so the windings can withstand elevated operating temperatures. Continuous service is permitted at ambient temperatures from 0 to 40 °C. The unit is supplied without a holding brake, so any load that must remain fixed at standstill requires external holding force.