Product Description:

The MSK061C-0600-NN-S3-UP1-NNNN is a synchronous servomotor from Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series. It serves as the electromechanical actuator for numerically controlled axes, supplying commanded torque and velocity to machinery used for packaging, assembly, or material removal. The standard frame, identified by size 061 and length C, integrates a rotatable 240° feedback connector, an electrically released holding brake, and winding code 0600 so the motor mates directly with IndraDrive power stages without additional adapters or custom cabling.

Heat produced by the stator is removed through natural convection, eliminating fans and reducing maintenance in cabinets with limited airflow. Position and speed data are exchanged over the Hiperface interface, and the encoder uses capacitive scanning to resist contamination from oil or dust. It delivers single-cycle accuracy because the feedback element is a single-turn device that provides 16 signal periods per revolution. For mechanical safety, the integrated brake supplies 10 Nm of static holding torque to lock vertical loads when power is removed. The standard housing supports stable motor operation and suits enclosed machine layouts where added cooling hardware is undesirable.

The motor can be mounted in washdown or dust-laden zones because the housing is rated at IP65 against water jets and solid ingress. Continuous operation is specified for ambient conditions from 0 to 40 °C, allowing installation inside typical control enclosures without auxiliary cooling fans. The output geometry is a shaft with a keyway, which simplifies coupling to pulleys or gearboxes. Electrical insulation conforms to class 155, permitting winding hot spot temperatures up to 155 °C before thermal derating begins during continuous industrial operation.