Product Description

The MSK061C-0600-NN-S2-UG0-RNNN is an industrial synchronous motor produced by highly trained engineers of Rexroth Indramat to operate as a rotary main or a servo motor in the industrial servo system. This motor is a unique industrial machine as it features a highly durable industrial housing that contains a high metal content and is covered with a special black (RAL 9005) 2k epoxy resin coating, which is completely resistant against mineral oils, seawater, and diluted acids or alkali, this motor coating also offers substantial protection against organic solvents and hydraulic oils. This industrial motor is also perfectly safe for industrial operation as it is free of dangerous chemicals mercury, asbestos, and chlorinated hydrocarbons. Special ball bearings are also integrated into this industrial motor; these bearings help to reduce the frictional heat generated at the motor’s shaft during operation.

The MSK061C-0600-NN-S2-UG0-RNNN industrial synchronous motor operates with a rated current of about 7.7 amperes; at this current, the output shaft of this industrial motor rotates at a speed of about 2000 revolutions per minute while generating an output torque of about 8.0-newton meters. At a motor surface temperature of about 20 degrees Celsius, this industrial motor operates at a torque constant of 1.14-newton meters per ampere and a voltage constant of about 70.5 volts per minute. Also, the winding resistance of this industrial motor at this temperature is about 1.55 ohms.

The MSK061C-0600-NN-S2-UG0-RNNN industrial synchronous motor contains about four pole pairs; it can also reach a maximum speed of 6000 revolutions per minute while drawing an input current of 34.7 amperes from the power supply unit. Under normal operating conditions, this industrial motor operates with a time constant of about 15 minutes.